Phoenix Concrete Co. serves homeowners and builders across Phoenix and the Salt River Valley. We install concrete driveways, patios, foundations, slabs, sidewalks, pool decks, and decorative surfaces. Our crews also handle commercial concrete, repairs and resurfacing, polished flooring, and ready mix delivery. Every scope is planned for the property, intended load, finish, and site conditions.
Expansive clay and caliche soils, triple-digit summer heat, and monsoon downpours from July through September can all shorten the life of a poorly planned slab. We account for soil movement, hot-weather curing, drainage, reinforcement, and control-joint placement before concrete is poured. Phoenix Concrete Co. is a licensed and insured contractor with an active Arizona Registrar of Contractors license, workers compensation, and general liability coverage. Our mix and placement practices follow applicable ASTM C94, ACI 318, and ACI 305 guidance.
From Arcadia and Ahwatukee to Laveen, Mesa, and the West Valley, we coordinate permits, base preparation, placement, finishing, and curing for residential and commercial work. Request a free concrete estimate before your next project breaks ground.
Concrete Work Built for Phoenix
Our work covers new flatwork, structural concrete, decorative finishes, repair, and commercial placement. Each service is matched to Phoenix soil, heat, drainage, access, load, and finish requirements rather than treated as generic flatwork.
A standard Phoenix driveway is typically 4 inches thick with fiber mesh or rebar reinforcement. We compact the base and cut control joints every 8 to 10 feet to manage settlement and thermal expansion; installed broom-finish work typically costs between $8 and $14 per square foot, depending on base preparation and finish.
Explore Service
Phoenix patios are graded with a minimum 1/8 inch per foot slope away from the foundation for monsoon runoff. Stamped textures, stains, cool-mix technology, and UV- and chlorine-rated sealers create practical outdoor surfaces for a climate where evenings can be enjoyed about nine months of the year.
Explore Service
Residential and commercial slabs are specified for their load and use, often at 3,000 to 4,000 psi for residential and structural work. Commercial floors can add vapor barriers, higher-strength mixes, and engineered FF/FL flatness tolerances.
Explore Service
We place monolithic and stem-wall foundations engineered for Phoenix's reactive clay soils and expected structural load. The scope can include municipal permitting, reinforcement, and mix strengths commonly ranging from 3,000 to 4,000 psi.
Sidewalk replacement is planned around safe slopes, drainage, adjacent grades, and ADA requirements. Where the work enters a public right-of-way, we manage the applicable City of Phoenix or Maricopa County permitting.
Concrete walkways and pathways connect entries, yards, pool areas, and outdoor living spaces with a durable surface. We plan the route, base, slope, joints, and broomed or decorative finish around foot traffic and runoff.
Repair starts by identifying whether cracking came from soil movement, inadequate compaction, poor joint spacing, moisture, or load. Options include bonded overlays for worn slabs and epoxy or polyurethane injection for structural foundation cracks wider than 1/8 inch.
Stamped concrete can reproduce ashlar slate, cobblestone, and running-bond brick patterns with integral pigment or dry-shake hardener. The result adds texture and color while using materials selected to resist intense Phoenix UV exposure.
Concrete pavers provide a modular option for hardscape layouts and borders. On Phoenix sites, their long-term performance still depends on thoughtful drainage, compacted base material, and preparation for expansive soil movement.
Commercial work includes retail pads, parking structures, warehouse floors, tilt-up pads, and loading docks. We coordinate inspections, engineered mixes, delivery sequencing, and early-morning placement when summer heat could otherwise cause flash-set problems.
Specialized finishes, custom mixes, sealing, and resurfacing adapt concrete to appearance, maintenance, heat, traffic, and exposure requirements. These options can be included in a new installation or selected to improve an existing surface.
Decorative concrete delivers color, texture, and sheen without relying on a single finish for every property. We match the method to indoor or outdoor use, direct sun, pool exposure, slip resistance, and the look of the surrounding architecture.
We coordinate with local batch plants so properly proportioned concrete reaches the site while it is workable. Delivery timing, crew readiness, mix temperature, project volume, and Phoenix traffic all become part of the placement plan.
Sealing limits moisture and UV damage while staining adds durable color to new or existing concrete. In Phoenix's heat-heavy climate, the right chemistry and reapplication schedule help preserve the surface instead of simply changing its appearance.
Not every worn or cracked slab needs full demolition. We evaluate movement, surface condition, crack width, load, and drainage before recommending a bonded overlay, injection repair, joint treatment, or replacement.
Phoenix concrete performance depends on accountable contracting, locally informed planning, and disciplined placement. Our approach connects permits and coverage with soil preparation, mix design, inspection requirements, finishing, and curing.
Phoenix Concrete Co. carries an active Arizona Registrar of Contractors license, bonding, workers compensation, and general liability coverage. We manage applicable City of Phoenix, Maricopa County, and municipal permits so the project is tied to an accountable contractor.
Expansive clay, caliche, extreme heat, and monsoon runoff shape the way we prepare and pour. Base compaction, drainage, early-morning scheduling, evaporation control, and curing are selected for Sonoran Desert conditions.
Mix designs and placement practices follow applicable ASTM C94 and ACI 318 requirements, with ACI 305 guidance for hot-weather work. Strength, reinforcement, vapor control, flatness, and delivery timing are matched to the slab's actual use.
Cracks, settlement, spalling, and joint damage usually have an underlying cause. We evaluate the base, soil movement, water path, joint layout, surface exposure, and loads before recommending repair or replacement.
Request a Free EstimatePhoenix's expansive clay and caliche can move as moisture conditions change, especially around South Mountain and Laveen. Without a suitable base and structural design, that movement can produce settlement cracks and uneven slabs.
Loose or uneven base material allows a slab to settle under its own weight and traffic. We compact prepared bases to a minimum 95 percent proctor density before placement.
Concrete naturally shrinks and expands, so missing or widely spaced control joints leave cracking to occur in uncontrolled locations. A typical 4-inch residential slab uses joints every 8 to 10 feet, adjusted for slab geometry.
Water that collects beside foundations or enters open joints can weaken support and worsen movement. Positive slope, joint sealing, and a planned runoff path help keep July-through-September monsoon water away from vulnerable edges.
High ambient temperatures accelerate surface set, evaporation, and loss of workability. Without coordinated delivery, evaporation retarders, curing compounds, and an adjusted finishing schedule, a summer pour can develop flash-set cracking or crazing.
Direct UV exposure, moisture, pool chemicals, freight traffic, and forklift loads can damage the surface or joints. The right response may be an overlay, penetrating sealer, epoxy injection, or heavy-load polyurethane joint fill.
A durable result starts before the truck arrives. We move from site evaluation and scope definition through preparation, reinforcement, placement, finishing, curing, and final protection with responsibilities clear at each stage.
We review access, grades, soil movement, drainage, intended loads, finish goals, and permit needs. The resulting free estimate identifies the planned preparation, materials, reinforcement, and finish.
Where needed, the existing slab is removed and the work area is excavated to the required depth. Grades are established so the new concrete directs water away from structures and connects cleanly with surrounding surfaces.
Aggregate base is placed evenly and compacted to a minimum 95 percent proctor density. For residential base planning, the 4-2-1 guideline uses 4 inches of compacted aggregate, 2 inches of sand bedding, and at least 1 inch of fall per 10 feet.
Forms set the slab dimensions and elevations, while rebar or fiber mesh is positioned for the expected load. We specify the psi strength, water-cement ratio, admixtures, and any fly ash or slag substitution for the project and weather.
Delivery is sequenced so the crew can place and consolidate concrete inside its workable window. We finish the selected texture, cut or tool control joints, and use early-morning placement when Phoenix heat makes timing critical.
Concrete generally reaches initial set in 24 to 48 hours, with foot traffic often possible in 3 to 5 days and vehicle traffic after about 7 days. Full design strength takes the standard 28 days, so we provide curing and use guidance and apply specified protection at the proper stage.
Phoenix Concrete Co. works across the Salt River Valley, from central neighborhoods to the East and West Valley. Phoenix covers 517.9 square miles, and our service footprint extends across the greater metro area and its 5.19 million residents.
Tell us whether you are planning a driveway, patio, slab, foundation, decorative surface, delivery, or repair. We will review the site conditions, finish goals, access, drainage, and load requirements and prepare a free estimate for the scope.
These answers cover pricing, preparation, placement, curing, repair, sealing, finishes, and service coverage for Phoenix concrete projects. A site-specific estimate is still the best way to confirm the right scope and current material pricing.
Call Phoenix Concrete Co.Delivered ready-mix concrete in Phoenix typically runs between $150 and $190 per cubic yard, depending on mix design, psi strength, and delivery distance. Fiber reinforcement, fly ash substitution, or hot-weather admixtures can increase the base price, and current cement and aggregate costs are confirmed when the estimate is prepared.
The 4-2-1 base guideline means 4 inches of compacted aggregate, 2 inches of sand bedding, and a minimum 1 inch of fall per 10 feet for drainage. Phoenix's expansive soils make preparation especially important, so the base is compacted to a minimum 95 percent proctor density before placement.
A standard 4-inch, 1,000-square-foot slab requires roughly 12.3 cubic yards of concrete. Installed pricing typically runs from $6,500 to $11,000 for base preparation, forms, reinforcement, and a broom finish, while stamped or decorative work on the same footprint often ranges from $14,000 to $18,000.
ASTM C94 requires ready-mix concrete to be discharged within 90 minutes of batching or before the drum reaches 300 revolutions, whichever occurs first. Phoenix summer heat can shorten the workable window, so delivery timing, crew readiness, and hot-weather admixtures are coordinated before the truck arrives.
Common failures include inadequate base compaction, missing or poorly spaced control joints, incorrect water-cement ratios, and unmanaged evaporation during extreme heat. Reinforcement placed too low or omitted can also contribute to premature cracking under load.
Concrete generally reaches initial set within 24 to 48 hours, with foot traffic often possible in 3 to 5 days and vehicle traffic after about 7 days. Full cure and design strength take the standard 28 days, and hot weather increases the need for evaporation control and proper curing compounds.
Concrete combines portland cement, aggregate, water, and often admixtures, and it gains strength through chemical hydration rather than simple drying. Residential flatwork commonly targets 3,000 to 4,000 psi, while driveways or structural elements may call for 4,000 psi or higher based on load and design.
A standard installed driveway typically costs between $8 and $14 per square foot, depending on finish and base preparation. A typical Phoenix driveway is 4 inches thick with fiber mesh or rebar, with control joints generally spaced every 8 to 10 feet.
A patio with suitable underlying concrete and surface spalling, pitting, or hairline cracking may be a candidate for a bonded overlay instead of full removal. Resurfacing can save many homeowners 40 to 60 percent compared with replacement, but the slab must be evaluated first.
The decision depends on the crack cause, slab movement, surface condition, load, and drainage. A bonded driveway overlay can be 1/4 inch to 2 inches thick and may cost about a third of demolition and repour, while structural cracks wider than 1/8 inch may require epoxy or polyurethane injection.
Reapply protection every 2 to 3 years on UV-exposed slabs. Properly protected concrete can last 25 years, while neglected concrete may spall in about 8 years, making sealer selection and maintenance important in direct Phoenix sun.
Decorative options include ashlar slate, cobblestone, and running-bond brick stamps; acid and water-based stains; exposed aggregate; saw-cut scoring; stamped borders; and polished floors. Interior slabs can be ground through multiple diamond-grit stages to a 400-800 grit sheen.
Commercial slabs are designed around inspection requirements, freight or forklift loads, and facility use. A project may need higher psi strength, a vapor barrier, engineered FF/FL flatness tolerances, epoxy injection, polyurethane joint fill, or sequenced early-morning pours.
Phoenix Concrete Co. serves the Salt River Valley, including Phoenix neighborhoods such as Arcadia, Biltmore, Ahwatukee, Desert Ridge, Deer Valley, Sunnyslope, Paradise Valley Village, South Mountain, and Laveen. Coverage also extends to Scottsdale, Tempe, Chandler, Gilbert, Mesa, Glendale, Peoria, Sun City, and the West Valley.